SHOWER UPGRADE 101 - TOP TIPS FOR NEW UNIT INSTALLATION

Shower Upgrade 101 - Top Tips For New Unit Installation

Shower Upgrade 101 - Top Tips For New Unit Installation

Blog Article

Request An Appointment



Have you been on the lookout for critical information around How to Install a Direct-to-Stud Shower Enclosure?


How to Install a One-Piece Shower Unit
An effective shower installation requires careful planning and a lot of work. In many cases, you will certainly require to do three types of tasks: framing walls, installing the plumbing, and finishing walls.

Prep work


First of all, you should choose the type of shower that you want to set up. It is essential to determine whether the chosen shower can managing particular systems and also can manage a secure degree of water via the central heating boiler. A lot of shower systems nowadays are created to be versatile to different water pressures (such as stored warm water and also cool keys).
It is likewise crucial to consider the water pressure and also the preparation of the piping as well as drain for the shower

Different Types of Shower Units


  • Push-on Mixer: The hose and also spray parts of the push-on mixer shower device can be attached to the bath faucet according to your requirement, and also the water temperature can be adjusted by means of the taps. Push-on mixers are cheap and also very easy to mount. Nevertheless, although the hose pipe link is basic, it is easily displaced. Additionally, it is bothersome to change the temperature.

  • Bath/Shower Mixer: The pipe and spray of this sort of shower are integrated with a bathroom mixer tap, and also the temperature can be adjusted with the bath faucets. It is a very affordable option as well as no extra plumbing is included. However, the bath/shower mixers likewise suffer from troublesome temperature level control options.

  • Guidebook Mixer: The hose as well as spray of a manual mixer shower system belong of the wall device and the cold and hot water supplies are linked to a solitary valve The temperature level and pressure of the water are regulated through either one or a range of handles (in much more pricey showers). Although temperature control is a lot easier in hand-operated mixer types, they are much more pricey than the previously pointed out mixers. They additionally require extra plumbing of cold and hot water supply pipelines.

  • Thermostatic Mixer: The hose as well as spray of this shower kind are a part of the wall system as well as the cold and hot water supplies are linked to a solitary shutoff here too. It is total with an integrated stabiliser to self-adjust the water temperature and to avoid it from coming to be too hot. One of the largest benefits of a thermostatic mixer shower type includes practical temperature control. Nevertheless, it is one of the most pricey of the different mixer options.

  • Power Shower: A power shower is a solitary device having a powerful electrical pump that is capable of changing both the water pressure as well as temperature level. This kind of shower can be fitted if there is water from a cold water tank and also a hot water cylinder. A power shower makes the change of both stress and also temperature easy. On the other hand, it is unsuitable for water heated up directly by the shower or where the water is provided by a mix central heating boiler under keys stress.

  • Electric Shower: An electrical shower is plumbed right into a keys cold water supply and also it warms the water electrically. It is necessary to keep in mind that for this shower kind to be set up, the keys stress requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The system enables the temperature level as well as pressure to be readjusted by means of a handle. Designs with temperature level stabilisers are much better as they stay unaffected by other taps elsewhere in use within the household. A major drawback of electric showers is that the control handle just permits the choice of high temperatures at less pressure, or lower temperatures at a better stress. This is problematic in the winter season when the spray is frequently weak as well as the mains water is colder. However, this problem is taken on in some versions which are offered with a winter/summer setting.


  • Method


    Depending on the sort of shower you desire to set up, the shower head must either be suited order to prevent its contact with the water in the bath listed below or the base tray, or it should have a check valve.
    Prior to starting, it is advisable to note the positions of the shower head and also control, as well as to plan the pipe-work entailed. Furthermore, the drainage system to eliminate the waste water will certainly need to be intended. Both settings of the cable course as well as the shower button will certainly likewise need to be taken into consideration if an instantaneous or electrical shower unit is being mounted.
    Use the guideline guide given with the shower system to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is very important to remove the supply of water. In order to shield the pipes, they need to be provided a water-proof covering and likewise fitted with separating valves. The pipes can then be hidden into the wall surface and glued over to neaten the total look.
    Fit the base tray, shower head, and also fittings.
    Link the major shower control to the pipes that will certainly be supplying the water (This may call for a female screw thread adapter).
    Reconnect the water and examination the pipelines for any type of leakages, as some might need tightening up.
    If you are installing an electrical shower, bear in mind to switch off the electrical power supply prior to making any electrical links. When these links have been made (there should be support within the user's manual), the power supply can be switched back on.

    Changing Water Stress to Suit Your Shower


    The cold water tank can be raised to a better elevation (sometimes as little as 150mm (6inches)) by fitting a solid wood support below it - potentially made up of struts and blockboards. If you choose this choice, the major and also distribution pipes will likewise need to be elevated to meet the new elevation of the storage tank.
    Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it needs to be attached right into the power supply in order to run.

    Piping and Drainage


    It is best to utilize 15mm diameter supply pipes, as well as make the runs to the shower as short and straight as possible so as to maintain maximum stress and also reduce warmth loss. In addition, by reducing using elbows for pipe corners, you can decrease the resistance in the flow of the water system. You can accomplish this by flexing the pipelines rather.

    A Lot Of Usual Blunders


  • Going against or neglecting regional code limitations.

  • Using pipes that are also tiny.

  • Connecting copper to galvanized without utilizing a brass or dielectric fitting between both.

  • Not making use of tape or pipe compound at threaded joints.

  • Uneven your fixtures when installing them.

  • Not installing an air gap filling for fixtures.

  • Reducing supply stub outs also brief to set up the shutoff valves onto after the completed wall is in place.

  • Not properly aligning tubes right into installations or stop valves. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will certainly trigger a leak.).

  • When turning the water back on in your house, constantly run the outside hose pipe valve or purge your commodes to hemorrhage dirt and air from the lines. This particles can create issues in your sink faucets and various other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a Direct-to-Stud Shower Enclosure

    I found that article about How to Install a Direct-to-Stud Shower Enclosure while exploring the web. Feel free to take the time to distribute this write-up if you appreciated it. Many thanks for your time. Come back soon.




    Visit Site


    Report this page